Capturing Videos - Sony PCG-FX801 Software Manual

Using Video software

Capturing videos

You can automatically or manually import videos onto your computer.
To automatically import videos onto your computer, proceed as follows:
1 Launch DVgate Motion.
2 Click the down arrow and select Import-Auto from the Mode drop-
down list.
Use the DVgate camera controls buttons to play, rewind or fast
forward the tape to the selected time code to begin capturing.
3 Press Play to start the video.
The video begins to play in the Monitor window.
4 Click Mark to mark the beginning of the first segment.
The first frame of the segment to be captured, is displayed in the In/
Out list window.
Click Mark again to mark the end of the segment to capture.
The last frame of the segment to be captured, is displayed in the In/
Out list window.
Continue to mark as many segments as you want.
5 Click Capture to import the selected video segment or click Capture All to import them all at once.
The Save as a file window appears.
6 Select the location to save the file.
7 Click the Save button.
DVgate captures the segments.
The Capturing complete message appears.
8 Click OK in the DVgate Motion window to finish.
Information about the capturing process is displayed in the Report window.
9 Click OK.
n N
16