Modem Port - Siemens SIMATIC NET RUGGEDCOM RS400 Installation Manual

(Straight Tip) connectors. Make sure the Transmit (Tx) and Receive (Rx) connections
of each port are properly connected and matched to establish a proper link.
Port Types
1
1
2
Figure 4.3
1
1
2
Figure 4.5
Specifications
For specifications on the available fiber optic Ethernet ports, refer to
Ethernet Port Specifications (Page
4.3

Modem Port

The RUGGEDCOM RS400 can optionally be equipped with a V.90 Modem connection
for PPP (Point-to-Point Protocol) connections. For information about how to
configure and operate the modem, refer to the RUGGEDCOM ROS Configuration
Manual for the RUGGEDCOM RS400.
Fire hazard – risk of serious personal injury and/or damage to equipment
To reduce the risk of fire, use only #26 AWG or larger telecommunication line cord.
RUGGEDCOM RS400
Installation Manual, 01/2021, C79000-G8976-1016-11
2
Tx Connector
Rx Connector
MTRJ Port
Tx Connector
Rx Connector
SC Port
WARNING
1
Tx Connector
1
Rx Connector
2
Figure 4.4
2
1
Tx Connector
1
Rx Connector
2
Figure 4.6
28)".
Communication Ports
4.3 Modem Port
2
LC Port
2
ST Port
"Fiber Optic
21