Table of Contents
Advertisement
2-2: CONTRAST MAX
1.
Receive the color bar pattern. (RF Input)
2.
Using the remote control, set the brightness and
contrast to normal position.
3.
Activate the adjustment mode display of Fig. 2-1 and
press the channel button (35) on the remote control to
select "CONTRAST MAX".
4.
Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "53"
5.
Check if the picture is normal.
6.
Receive the color bar pattern. (VIDEO Input)
7.
Press the INPUT SELECT button on the remote
control to set to the AV mode.
8.
Using the remote control, set the brightness and
contrast to normal position.
9.
Activate the adjustment mode display of Fig. 2-1 and
press the channel button (35) on the remote control to
select "CONTRAST MAX".
10.
Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "53".
11.
Check if the picture is normal.
12.
Receive the color bar pattern. (AV RGB Input)
13.
Using the remote control, set the brightness and
contrast to normal position.
14.
Press the INPUT SELECT button on the remote
control to set to the AV2(RGB) mode.
15.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (35) on the remote control to
select "CONTRAST MAX".
16.
Press the LEFT/RIGTH button on the remote control
until the contrast step No. becomes "53".
17.
Check if the picture is normal.
18.
Receive the color bar pattern. (S-VIDEO Input)
19.
Using the remote control, set the brightness and
contrast to normal position.
20.
Press the INPUT SELECT button on the remote
control to set to the AV3(Y/C) mode.
21.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (35) on the remote control to
select "CONTRAST MAX".
22.
Press the LEFT/RIGTH button on the remote control
until the contrast step No. becomes "53".
23.
Playback the DVD(480i) disc. (COMPONENT Input)
24.
Press the INPUT SELECT button on the remote
control to set to the COMPONENT mode.
25.
Using the remote control, set the brightness and
contrast to normal position.
26.
Activate the adjustment mode display of Fig. 2-1 and
press the channel button (35) on the remote control to
select "CONTRAST MAX".
27.
Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "56".
28.
Playback the DVD(480i) disc. (HDMI Input)
29.
Press the INPUT SELECT button on the remote
control to set to the HDMI mode.
30.
Using the remote control, set the brightness and
contrast to normal position.
31.
Activate the adjustment mode display of Fig. 2-1 and
press the channel button (35) on the remote control to
select "CONTRAST MAX".
32.
Press the LEFT/RIGHT button on the remote control
until the contrast step No. becomes "56".
33.
Check if the picture is normal.
ELECTRICAL ADJUSTMENTS
D-2
Advertisement
Table of Contents
