Table of Contents
Advertisement
FUNCTION AND OPERATION
Analogue Manual Tune
The television can be tuned-in manually using Manual tuning. For example: if the television
cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on
another System.
Use
and
to move across the screen and select any of these Manual Tune options.
Programme
System
Colour system
Programme skip
Channel
Search
Manual fine tuning : Only used if interference/weak signal is experienced.
Station
To allocate a programme position on the television for a decoder and media recorder: turn the
decoder on, insert a pre-recorded film in the media recorder and press PLAY, then manually tune.
file://C:\Documents and Settings\Alexsandr\Local Settings\Temp\Rar$EXa0.804\32W...
: The number to be pressed on the remote control.
: Specific to certain areas.
: Factory set to Auto, should only be changed if problems are
experienced, i.e. NTSC input from external source.
means nothing has been stored or the facility to skip the
:
channel is ON.
: The channel number on which a station is being broadcast.
: Search up and down for a signal.
: Station identification. Use the
up to seven characters.
or
and
or
buttons to enter
Стр. 1 из 5
02.05.2015
Hide quick links:
Advertisement
Table of Contents
