Table of Contents
Advertisement
downloading of text messages from the Blue-
®
tooth
phone must have been completed.
The menu item is otherwise greyed out. Fur-
ther information on text messages
(
page 409).
Y
If you have an unread text message, the 1
mail symbol is displayed. The symbol disap-
pears once you have read the text message.
The ú mail symbol is displayed as soon as
the text message memory is full. The symbol
disappears once you delete at least one text
message.
Switching on and changing telephony
operating modes
Overview
If your vehicle is equipped with convenience
telephony, COMAND Online starts the teleph-
ony mode depending on whether a telephone
module with Bluetooth
ted in the fitting or not.
If neither a telephone module with Bluetooth
(SAP profile) nor a mobile phone bracket is
inserted, COMAND Online immediately starts
the telephony via the Bluetooth
Activating with inserted telephone
module with Bluetooth
If a telephone module with Bluetooth
profile) is inserted, COMAND Online starts
the SAP telephony.
i
If no telephone module with Bluetooth
(SAP profile) is inserted, COMAND Online
checks whether a mobile phone bracket is
inserted and, if so, which type.
i
You must set up your »telephone module
®
with Bluetooth
(SAP profile)« before first
use so it is recognised by COMAND Online
(
page 420).
Y
If no mobile phone is connected to the tele-
phone module with Bluetooth
the
Ready for Bluetooth telephony...
Ready for Bluetooth telephony...
®
(SAP profile) is inser-
®
interface.
®
(SAP profile)
®
(SAP
®
®
(SAP profile),
message appears. Approximately two
minutes after switching on COMAND Online,
a prompt will appear asking whether you wish
to switch to Bluetooth
If you confirm by selecting
for Bluetooth telephony...
for Bluetooth telephony...
will appear. COMAND Online will search for
the two mobile phones last connected via the
®
Bluetooth
interface. If one of the two mobile
phones is found, the telephone basic menu
®
for Bluetooth
telephony appears
(
page 394). If neither of the mobile phones
Y
is found, the
Ready for Bluetooth tel‐
Ready for Bluetooth tel‐
ephony...
ephony...
message remains in the display.
You can now connect your mobile phone
(
page 390).
Y
If you choose
No
No, the
nectivity...
nectivity...
message reappears.
Activating without a telephone module
with Bluetooth
®
Bluetooth
telephony is started
COMAND Online starts telephony via the
®
®
Bluetooth
interface and searches for the last
two mobile phones to have been connected
via the Bluetooth
mobile phones is found, the telephone basic
menu for Bluetooth
(
page 394). If neither of the mobile phones
Y
is found, the
Ready for Bluetooth tel‐
Ready for Bluetooth tel‐
ephony...
ephony...
message remains in the display.
You now have to connect your mobile phone
(
page 390).
Y
i
If you do not connect another mobile
phone via the phone list, the Bluetooth
connection with the mobile phone remains
active until the next time COMAND Online
is switched off. While the Bluetooth
nection is active, only the Bluetooth
face functions are available to you.
Switching between modes of telephony
If your vehicle is equipped with an optional
data-enabled telephone module with Blue-
Telephone
®
telephony.
Yes, the
Yes
Ready
Ready
message
Ready for SAP con‐
Ready for SAP con‐
®
(SAP profile)
®
interface. If one of the two
®
telephony appears
®
395
®
®
con-
inter-
Z
Advertisement
Table of Contents
