Toshiba 46TL868G Service Manual page 39

POS/VIDEO 0-99
(only available when "Change
DTV
POS/VIDEO" is On)
VIDEO1
VIDEO2
HDMI1
HDMI2
HDMI3
HDMI4
PC
Change Volume Off
On
Volume 0-100
(only available when "Change Volume"
is On)
Change Picture Mode Off
On
Picture Mode AutoView
(only available when "Change Picture
Dynamic
Mode" is On)
Standard
Movie 1
(EU:Hollywood 1)
Movie 2
(EU:Hollywood 2)
TV Power Disabled
Force On
Force Standby
Position Change on HDMI Input On
Off
>> terms and conditions
TOSHIBA WEB-ZEUS
Copyright © 1995-2011 TOSHIBA Corporation, All Rights Reserved.
When TV is powered on by power button, tune to the last channel or input.
0-99 (ATV Channel Position)
DTV (DTV channel number can not be set. The last selected channel is shown.)
VIDEO1
VIDEO2
HDMI1
HDMI2
HDMI3
HDMI4
PC
TV volume level does not change when TV powers on
TV volume level is forced to "Volume" level when TV is powered on
Volume level when TV is powered on
Picture setting mode does not change when TV is powered on
Picture setting mode is forced to "Picture Mode" mode when TV is powered on
AutoView
Dynamic
Standard
Movie 1
(EU:Hollywood 1)
Movie 2
(EU:Hollywood 2)
TV returns to previous Standby/On State when AC power is applied
Power TV on when AC power is applied
Put TV in Standby when AC power is applied
RF tuning via P , P , RETURN, and number buttons is allowed. (Normal operation)
When viewing HDMI input, RF tuning via P
disabled
>> privacy policy
, P , RETURN, and number buttons is
0 - Grayed out when Hotel Mode = [Off]
- Grayed out when "Change POS/VIDEO"
= [Off]
Off - Grayed out when "Hotel Mode" = [Off]
30 - Grayed out when "Hotel Mode" = [Off]
- Grayed out when "Change Volume" =
[Off]
Off - Grayed out when "Hotel Mode" = [Off]
AutoView - Grayed out when "Hotel Mode" = [Off]
- Grayed out when "Change Selectable
Picture" = [Off]
Disabled - Grayed out when "Hotel Mode" = [Off]
On - Grayed out when "Hotel Mode" = [Off]