Trouble Shooting
• Mainboard not work
•
1. check if there is +12V/+5V
output on the power board
•
2.Verify if the DC/DC convertors
have the right output (5V,3.3V-
standby 3.3V,1.5V,1.15V)
•
3.Verify if the Mainchip
AudioAMP ...solder well;
•
4.Verify if the FLASH(U6) has the
right software and right voltage
3.3V;
•
5.Verify if the Y1 (Crystal) has the
right frequency(24MHz)
(MSD308BEM),
- 56 -
Panel not work
1. check if the voltage input and
output of voltage boost IC of the
backlight is OK ;
2.Verify if the Mainboard output the
right On/Off signal to power board;
3.Verify if the Mainboard output the
LVDS singal to panel T-con board
4.Verify if the software is the right
version of this model.
5.Change the LVDS wire to check if
it's broken.