Sony DPP-MS300E User Manual page 15

Adjusting the size or
direction for the image
and frame
Click "Frame" or "Image"
to designate the object
you want to adjust, then
adjust the size or
direction.
For details, see the Sony
Printer Utility for MS300/
MS300E Help.
Notes
• Use the set of print
paper and print
cartridge supplied
together in the same
carton. If you use the
paper and cartridge in
a different
combination, proper
printing results may
not be obtained or
other trouble may
occur. Also make sure
to set "Size" as shown
in the table. If you
make a different
setting, you cannot
print.
• For the details on print
paper and print
cartridge, refer to
"Using print packs (not
supplied)" on page 14
of the operating
instructions of the
printer.
4
Click "Next," then click the frame you want to print
over the image.
The selected frame overlaps the selected image, and
the overlapped image appears in the operation
window.
5
Click "Next" and the "Print" dialog box appears.
To change the printer settings, click "Print Setup"
in the "Print" dialog box.
The "Print Setup" dialog box appears.
6
Set "Size" of the "Paper" by referring to the
combination below.
Print paper
loaded
Standard paper
2/16-cut sticker
Super Coat
Print "Size" setting
cartridge loaded
Standard type A6 Standard/Sticker
Standard type A6 Standard/Sticker
Super Coat type A6 Super Coat
Select the
desired frame.
Combined
image of the
selected image
and frame
Adjust the size
or direction for
the image and
frame.
Select "Sony
DPP-MS300"
as the printer.
Select the
paper.
Orientation is
automatically
selected.
continued
15 GB
Basic Operations