Sony DPP-FP60 Operating Instructions Manual page 56

Symptom
The printer
driver cannot be
installed.
The printer does
not respond to
the printing
order from the
PC.
An image is
printed with
borders even if I
select
"Borderls"-
"No".
GB
56
Check
• Is there an anti-virus
program or other
program running on
the system?
• Did you log onto
Windows Vista/XP/
2000 Professional using
an Administrator user
account?
• Is an error message
displayed stating that
an error was detected
in output of documents
via USB?
• Are you using an
application software
other than Picture
Motion Browser?
Cause/Solutions
c If there is an anti-virus program or other
program running on the system, exit it
and then start installing the driver.
c To install the driver in Windows Vista/
XP/2000 Professional, log onto Windows
using an Administrator user account.
c If there is no trouble displayed on the
Windows desktop, check the printer's
LCD screen.
If the printer shows trouble, do the
following:
1. Turn off the 1 (on/standby) switch
then turn it on again.
2. Disconnect the power cable, wait for 5
to 10 seconds, and then connect the
cable again.
3. Restart your computer.
If these do not solve the problem, consult
with your Sony dealer or service
facilities.
c Remove the USB cable and then connect
it again.
c When using an application other than the
Picture Motion Browser, an image might
be printed with borders even if you select
borderless print.
When you can set border/borderless
with an application, set an image to be
printed fully in the print range even if it
is printed over the range.