Printing From A Pc (Pc Mode); Installing The Software; System Requirements - Sony DPP-FP30 Instruction & Operation Manual

Printing from a PC (PC mode)

To print from a PC connected to the
printer, you need to install the supplied
software to your PC.
This section explains how to install the
supplied software on your PC and how
to use the supplied PictureGear Studio
software to print an image.
Please also refer to the operating
instructions of your PC.
Installation of the software is necessary
only when you connect the printer to
your PC for the first time.
On trademarks and copyrights of
PictureGear Studio
• On copyrights of design materials
The copyrights of the design materials
contained in this software are owned by
Sony Corporation or Sony Music
Communications Corporation. Any
commercial use is prohibited by the
copyrights laws.
• Duplication of copyrighted materials, such
as photographs, is prohibited except for
private or domestic use.
• All other companies and product names
mentioned herein may be the trademarks
or registered trademarks of their respective
companies. Furthermore, "™" and "
not mentioned in each case in this manual.
Installing the
software

System requirements

To use the supplied printer driver and
PictureGear Studio, your PC must meet
the following system requirements:
OS: Microsoft Windows
Professional/Windows
Edition/Windows
Professional/Windows
Millennium Edition/Windows
Second Edition, pre-installed (IBM
PC/AT compatible)
(Windows 95, Windows 98 Gold
Edition, Windows NT, other
versions (ex. Server, Personal) of
Windows 2000 are not supported.)
CPU: Pentium III 500MHz or faster
(Pentium III 800MHz or faster is
recommended.)
RAM: 128 MB or more (256 MB or more
is recommended.)
Hard disk space: 200 MB or more
®
" are
(Depending on the Windows
version you use, more space will be
required. To handle image data,
you will need additional hard disk
space.)
Display:
Screen area: 800 x 600 pixels or more
Colors: High Color (16-bit) or more
®
XP
®
XP Home
®
2000
®
®
98
Continued
GB
15