Audio dubbing
If you recorded in 12 bit recording mode, you can add stereo narration or music to the
recording.
Making connections
To use additional audio line in
Connect the LINE OUT jacks of a audio source to the rear AUDIO IN jacks of the digital
camcorder using an audio connecting cord (not supplied) and then set AUDIO INPUT
SELECT to LINE.
To use an additional microphone
Use the built-in microphone or connect an external microphone (not supplied) to the
MIC (PLUG IN POWER) jack, then set AUDIO INPUT SELECT to MIC.
Audio source
LINE OUT
AUDIO IN
: Signal flow
MIC (PLUG IN POWER)
AUDIO INPUT SELECT
TV
67