Overlapping Two Pictures - Sony DCR-VX9000E Operating Instructions Manual

Overlapping two pictures

When using the overlap function, the picture gradually fades in over a still picture of
the last scene recorded.
(1) While the digital camcorder is in Standby mode, set DIGITAL MODE to OVERLAP.
(2) Press FADER/OVERLAP repeatedly until "OVERLAP" appears in the viewfinder.
(3) Press START/STOP to start recording.
The scene being shot gradually fades in over the still picture of the last recorded
scene.
1
DIGITAL MODE
ZOOM/16:9 WIDE
2
FADER
FADER/
OVERLAP
To cancel the overlap function
Before pressing START/STOP, press FADER/OVERLAP until the indicator disappears.
Notes on the overlap function
• You cannot use the overlap function while recording with interval recording, cut
recording, or photo recording.
• When in Standby mode select OVERLAP, the digital camcorder automatically goes
into picture search, then the last recorded scene is stored for overlap.
• When you set DIGITAL MODE to OVERLAP, 16:9 WIDE and D ZOOM settings are
set to OFF automatically.
30
STBY
OVERLAP
OVERLAP
OVERLAP
REC
3
START/STOP
LOCK
STANDBY
PHOTO
STANDBY