Advertisement
The Installation CD Graphic User Interface (GUI) will appear on your
screen. Click
Software
Click the icon for the U.S. Robotics Wireless Configuration Utility.
2
All manuals and user guides at all-guides.com
.
Click Wireless Access Point.
Follow the on-screen instructions and wait for some files to be copied to
your hard drive. A window will appear showing you the files that have
loaded onto your system. Close this window. The program window with
the Configuration Utility icons will appear. Close this window.
Note:
Each Wireless Access PC Card or PCI Adapter in the wireless network
must have the Infrastructure mode selected within the Configuration Utility.
If you are using a U.S Robotics Wireless Access PC Card or PCI Adapter, the
Configuration Utility will look like the graphic below.
Note:
The Wireless
Configuration Utility for
the Wireless Access Point
is not currently supported
for Windows NT.
3
Advertisement
