Table of Contents
Advertisement
System BIOS
BIOS Type
BIOS Features
Hardware Monitor
Temperature
Fan
Voltage
Support OS
OS
This motherboard supports Wake from on Board LAN. To use this function, please make
Environment
sure that the "Wake on Magic Packet from power off state" is enabled in Device Manager
> Intel® Ethernet Connection > Power Management. And the "PCI Devices Power On" is
Temperature
enabled in UEFI SETUP UTILITY > Advanced > ACPI Configuration. After that, onboard
LAN can wake up S5 under OS.
NOTE: Please refer to our website for the latest specifications.
If you install Intel® LAN utility or Marvell SATA utility, this motherboard may fail Win-
dows® Hardware Quality Lab (WHQL) certification tests. If you install the drivers only, it
will pass the WHQL tests.
4
32MB AMI UEFI Legal BIOS
- Plug and Play (PnP)
- ACPI 2.0 Compliance Wake Up Events
- SMBIOS 2.8 Support
- ASRock Rack Instant Flash
- CPU/DDR/FCH Temperature Sensing
- MB/Card Side Temperature Sensing
- Fan Tachometer
- Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by CPU
Temperature)
- Fan Multi-Speed Control
Voltage Monitoring: 3VSB, 5VSB, VCPU, VSOC, VCCM, APU
VDDP, 1.05V_PROM_S5, 2.5V_PROM, 1.05V_PROM_RUN,
BAT, 3V, 5V, 12V
Microsoft® Windows®:
- Windows 10 (64 bit)
Linux®:
- RedHat Enterprise Linux Server 8.2 (64 bit)
- CentOs 8.2 (64 bit)
Hypervisor:
- VMWare ESXi 7.0 U2
- vSphere 7.0 U2
* On the Windows 10 system, Raid Mode supports UEFI Boot only.
* The Linux system doesn't support Raid mode.
* Please refer to our website for the latest OS support list.
Operation temperature: 10°C ~ 35°C / Non operation
temperature: -40°C ~ 70°C
Advertisement
Table of Contents
