Related Manuals for Philips Momentum 3000 24M1N3200Z
Summary of Contents for Philips Momentum 3000 24M1N3200Z
- Page 1 Gaming Monitor M omentum 3000 24M1N3200Z 24M1N3200ZS 24M1N3200ZA 24M1N3200VS 24M1N3200VA 24M1N3200VL User manual Customer care and warranty Troubleshooting and FAQs www.philips.com/welcome...
-
Page 2: Table Of Contents
6.1 Resolution & Preset Modes ..19 7. Power Management ....20 8. Customer care and warranty .. 21 8.1 Philips’ Flat Panel Monitors Pixel Defect Policy ..... 21 8.2 Customer Care & Warranty ..24 9. Troubleshooting & FAQs ..25 9.1 Troubleshooting ...... -
Page 3: Important
DC power cord for normal operation. 1.1 Safety precautions and • Please use approved power cord maintenance provided by Philips all the time. If your power cord is missing, please Warnings contact with your local service Use of controls, adjustments or center. - Page 4 • To avoid potential damage, for panel. When moving your monitor, example the panel peeling from the grasp the frame to lift; do not lift bezel, ensure that the monitor does the monitor by placing your hand or not tilt downward by more than -5 fingers on the LCD panel.
-
Page 5: Notational Descriptions
Important information for Burn-in/ Note Ghost image Consult a service technician if the monitor does not operate normally, or • Always activate a moving screen you are not sure what procedure to take saver program when you leave when the operating instructions given your monitor unattended. -
Page 6: Disposal Of Product And Packing Material
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end- of-life management primarily entails This marking on the product or on participation in national take-back... -
Page 7: Setting Up The Monitor
(1) Gently attach the base to the 24M1N3200VA 24M1N3200VL Quick start stand. Register your product and get support at www.philips.com/welcome (2) Use your fingers to tighten the screw located at the bottom of the base. (3) Use a screwdriver to tighten the... -
Page 8: Operating The Monitor
Connecting to your PC 2.2 Operating the monitor Description of the control buttons 1 2 3 4 Earphone-Hang Press to switch power on. Press more than 3 seconds to switch power off. Access the OSD menu. Confirm the OSD adjustment. Adjust the Game Setting. - Page 9 Adaptive Sync MPRT What is On-Screen Display (OSD)? MPRT Level Crosshair On-Screen Display (OSD) is a feature Low Input Lag in all Philips LCD monitors. It allows an SmartResponse SmartFrame end user to adjust screen performance Size (1,2,3,4,5,6,7) Brightness (0~100) Contrast(0~100) or select functions of the monitors H.
- Page 10 If using an NVIDIA GeForce graph- ics card, G-Sync compatible will be enabled. • Go to www.philips.com/support Swivel to download the latest version of (24M1N3200Z/24M1N3200ZA/ leaflet to get more information on 24M1N3200VA) G-Sync certification.
-
Page 11: Remove The Base Assembly For Vesa Mounting
Height adjustment 2.3 Remove the Base Assembly (24M1N3200Z/24M1N3200ZA/ for VESA Mounting 24M1N3200VA) Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. - Page 12 Note This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface. VESA Mounting Screw M4. Always contact manufacturer for wall-mount installation. 100mm 100mm 0° 90° -5° * Display design may differ from those illustrated. Warning • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees.
-
Page 13: Image Optimization
How does it work? SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. Based on a scenario you select, • FPS: For playing FPS (First Person SmartImage dynamically enhances the Shooters) games. Improves dark contrast, color saturation and sharpness theme black level details. -
Page 14: Smartcontrast
Developed for wellbeing, and viewing enjoyment, stepping up Philips LowBlue Mode setting uses backlighting for clearer, crisper and a smart software technology to brighter images or dimming backlighting... -
Page 15: Nvidia® G-Sync® Compatible (24M1N3200Za)
• For best output performance, please always ensure that your graphic card is capable of achieving the maximum resolution and refresh rate of this Philips display. • NVIDIA® G-SYNC® support interface: DisplayPort. • Make sure your graphic card supports NVIDIA® G-SYNC®. -
Page 16: Adaptive Sync
• AMD Radeon R9 285 5. Adaptive Sync • AMD Radeon R7 260X • AMD Radeon R7 260 ■ Processor A-Series Desktop and Adaptive Sync Mobility APUs • AMD A10-7890K PC gaming has long been an imperfect • AMD A10-7870K experience because GPUs and monitors •... -
Page 17: Technical Specifications
6. Technical Specifications Picture/Display 24M1N3200Z/24M1N3200ZA/24M1N3200ZS: Monitor Panel Type IPS Technology 24M1N3200VL/24M1N3200VA/24M1N3200VS: VA Backlight W-LED Panel Size 23.8" W (60.5 cm) Aspect Ratio 16:9 Pixel Pitch 0.2745 (H) mm x 0.2745 (V) mm 24M1N3200Z/24M1N3200ZA/24M1N3200ZS: 1100:1 Contrast Ratio (typ.) 24M1N3200VL/24M1N3200VA/24M1N3200VS: 3500:1 Optimum Resolution 1920 x 1080 @ 165 Hz Viewing Angle 178°... - Page 18 130 mm (24M1N3200Z/24M1N3200ZA/ Height adjustment 24M1N3200VA) -90 / +90 degree (24M1N3200Z/24M1N3200ZA/ Pivot 24M1N3200VA) Power (24M1N3200Z/24M1N3200ZS) AC Input AC Input AC Input Consumption Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 50Hz 230VAC, 50Hz Normal Operation 19.1 W (typ.) 19.1 W (typ.) 19.2 W (typ.) Sleep (Standby mode)
- Page 19 Off mode 0.3 W 0.3 W 0.3 W AC Input AC Input AC Input Heat Dissipation* Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 50Hz 230VAC , 50Hz 72.01 BTU/hr 71.67 BTU/hr 70.65 BTU/hr Normal Operation (typ.) (typ.) (typ.) Sleep (Standby mode)
- Page 20 (Non-operation) Environmental and energy ROHS Packaging 100% recyclable Specific Substances 100% PVC BFR free housing Cabinet Color Black Finish Texture Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
-
Page 21: Resolution & Preset Modes
For best output performance, please always ensure that your graphic card Recommended Resolution is capable of achieving the maximum 1920 x 1080 @ 60 Hz resolution and refresh rate of this Philips display. H. freq Resolution V. freq (Hz) (kHz) 31.47 720x400 70.09... -
Page 22: Power Management
24M1N3200VL/24M1N3200VA/ 7. Power Management 24M1N3200VS Power Management Definition If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically Power VESA Mode Video H-sync V-sync Used Color reduce its power consumption when not in use. If an input from a keyboard, 21.0 W mouse or other input device is (typ.) -
Page 23: Customer Care And Warranty
Pixel Defect Policy single black pixel. Other combinations of lit and dark sub pixels appear as Philips strives to deliver the highest single pixels of other colors. quality products. We use some of the industry's most advanced... - Page 24 Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or panel in a Philips flat panel monitor sub pixels that are always dark or 'off' . must have pixel or sub pixel defects That is, a dark dot is a sub-pixel that...
- Page 25 BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer 2 adjacent dark subpixels 2 or fewer...
-
Page 26: Customer Care & Warranty
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below. -
Page 27: Troubleshooting & Faqs
• Disconnect the monitor from mains This page deals with problems that can power source immediately for safety be corrected by a user. If the problem • Contact with Philips customer still persists after you have tried these service representative immediately. solutions, contact Philips customer service representative. -
Page 28: General Faqs
• The remaining dots are normal disconnect your old monitor and characteristic of the liquid crystal reconnect your Philips LCD monitor. used in today’s technology, Please • Turn on your monitor and then turn refer the pixel policy for more detail. - Page 29 Can I connect my LCD monitor to please use isopropyl alcohol. Do any PC, workstation or Mac? not use other solvents such as Ans.: Yes. All Philips LCD monitors are ethyl alcohol, ethanol, acetone, fully compatible with standard hexane, etc.
- Page 30 EDFU? "burn-in" or "after-imaging" or "ghost imaging" will disappear Ans.: Important information manual gradually over a period of can be download on the Philips time after the power has been website support page. switched off. Always activate a moving screen saver program when you leave your monitor unattended.
- Page 31 This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.