Introducing The Cableless Measurement Auxiliary Devices - Philips IntelliVue CL SpO2 Instructions For Use Manual

Introducing the Cableless Measurement Auxiliary
Devices
IntelliVue CL Transmitter and IntelliVue CL Hotspot
IntelliVue CL Transmitter
The IntelliVue CL Transmitter and the IntelliVue CL Hotspot are auxiliary network devices that
convert the SRR radio technology from the IntelliVue CL SpO
WLAN or LAN technology. This allows data from the measurement devices to be transmitted to a PC
for use with IntelliVue GuardianSoftware.
The IntelliVue CL Transmitter is a mobile device which can be worn by the patient or by an attending
caregiver. It transmits vital signs data to IntelliVue GuardianSoftware while the patient is moving
around. The display on the CL Transmitter shows only technical data that may be useful for
troubleshooting system problems.
The IntelliVue CL Hotspot serves as an access point in a fixed location, to provide communication to
IntelliVue GuardianSoftware for any CL Pods currently in its transmission area. The CL Hotspots will
normally be located in areas where mobile patients regularly pass by or spend time. When the patient
comes into the transmission area, any available measurement results will be automatically
communicated to GuardianSoftware.
The IntelliVue CL Transmitter is battery-powered while the IntelliVue CL Hotspot is powered by an
external power supply or PoE (power over ethernet).
WARNING
The IntelliVue CL Hotspot may not be used in the patient vicinity.
1 Introduction and Basic Operation
IntelliVue CL Hotspot
Pod and the CL NBP Pod into
2
17