Reviewing An Image Right After Shooting; Selecting A Shooting Mode - Canon PowerShot SD750 Digital ELPH User Manual

Reviewing an Image Right After Shooting

After a shot is taken, the image appears in the LCD monitor for
approximately 2 seconds.
You can continue to display images regardless of the review duration
setting with the following procedures.
• Keeping the shutter button pressed after a shot.
• Pressing the FUNC./SET or DISP. button while the image is dis-
played in the LCD monitor.
To stop displaying the image, press the shutter button halfway.

Selecting a Shooting Mode

1.
Slide the mode switch to
Scene Mode) or
2.
Press the FUNC./SET button (b) and use the
button (c) to select a shooting mode.
You can also use the touch control dial to make a selection.
3.
Press the FUNC./SET button (d).
12
See the Advanced Guide: Review (p. 24).
See the Advanced Guide: Checking for Focus Right After
Shooting (p. 70).
See Erasing (p. 20).
(Rec.),
(Movie) (a).
a
c
b d
(Special
or