Basic Specifications - JBL DCR600 Service Manual

A/v dolby digital receiver
Hide thumbs Also See for DCR600:
Table of Contents

Advertisement

DCR600
TECHNICAL SPECIFICATIONS
Audio Section
Two-Channel Stereo Mode
75W per channel continuous RMS power into 8 ohms
at 0.08% THD, 100Hz to 20kHz
(frequencies below 100Hz are handled by
SCS135S powered subwoofer)
Five-Channel Cinema Mode
100W per channel dynamic RMS power
into 8 ohms at 0.08% THD,
100Hz to 20kHz (frequencies below 100Hz
are handled by SCS135S powered subwoofer)
Input Sensitivity/Impedance
200mV/47k ohms
Signal-to-Noise Ratio
Surround System Adjacent Channel Separation
Analog Decoding
Dolby Digital
DTS
Frequency Response
10Hz–100kHz (+0, –3dB)
FM Tuner Section
Frequency Range
Usable Sensitivity
Signal-to-Noise Ratio
Distortion
Stereo Separation
Selectivity
Image Rejection
IF Rejection
Tuner Output Level
*Manufactured under license from Dolby Laboratories. "Dolby," "Pro Logic," "AC-3" and the Double-D symbol are trademarks
of Dolby Laboratories. Confidential Unpublished Works. ©1992–1999 Dolby Laboratories, Inc. All rights reserved.
DTS and DTS Surround are registered trademarks of Digital Theater Systems, Inc.
UltraStereo is a trademark of UltraStereo Corp.
VMAx is a registered trademark of Harman International Industries, Inc., and is an implementation of
Cooper Bauck Transaural Stereo under patent license.
Logic 7 is a registered trademark of Lexicon, Inc., a Harman International Company.
Crystal is a registered trademark of Cirrus Logic Corp.
DCR600
95dBA
40dB
55dB
55dB
87.5–108MHz
1.3µV/13.2dBf
70dB (mono)
68dB (stereo)
0.2% (mono)
0.3% (stereo)
40dB @ 1kHz
±400kHz, 70dB
80dB
90dB
500mV at 1kHz,
±75kHz Deviation
AM Tuner Section
Frequency Range
Signal-to-Noise Ratio
Usable Sensitivity
Distortion
Selectivity
Video Section
Format
Input Level/Impedance
Output Level/Impedance 1Vp-p/75 ohms
Video Frequency
Response
General
Unit Power Consumption 72W idle, 580W maximum
Unit Dimensions
Width
Height
Depth
Unit Weight
Depth measurement includes knobs, buttons and terminal connections.
Height measurement includes feet and chassis.
All features and specifications are subject to change without notice.
4
520–1710kHz
45dB
500µV (loop)
0.8% (1kHz, 50% Modulation)
30dB at ±10kHz
NTSC
1Vp-p/75 ohms
10Hz to 8MHz (–3dB)
17.3 inches (440mm)
6.5 inches (165mm)
17.1 inches (435mm)
31 lb (14.1kg)

Advertisement

Table of Contents
loading

Table of Contents