Table of Contents
Advertisement
Charging the battery pack
Turn off the camera and place the camera
with the battery pack inserted on the camera
adaptor. Charging starts automatically. The
CHARGE indicator of the camera adaptor
lights up.
When the camera is turned on, the camera
•
adaptor stops charging the battery pack.
When the charging reaches to Normal
•
charge*, the CHARGE indicator goes off.
* Recording and playback time with Normal
charge is approximately 90% of Full charge.
The time of the full-charge for a
•
completely discharged battery at the
temperature of 25 °C (77 °F) is
approximately 170 minutes.
It may take longer to charge depending on
the charging condition and environment.
You may not be able to turn off the printer,
•
even when you press the 1 (on/standby)
button on the remote control. If the motor
in the printer is still running, turn off the
camera after the motor stops running. You
cannot charge the battery while the motor
is running.
If CHARGE indicator fails to light or
•
blinks for more than 10 seconds, refer to
"Troubleshooting".
After attaching the camera to the camera
•
adaptor, the CHARGE indicator may flash
for 3 to 10 seconds. This indicates
communication between the camera and
the camera adaptor, and it is not a
malfunction.
Charging temperature
The temperature range for charging is 0 °C
to 40 °C (32 °F to 104 °F). However, to
provide maximum battery efficiency, the
recommended temperature range when
charging is 10 °C to 30 °C (50 °F to 86 °F).
20
Advertisement
Table of Contents
