Epson STYLUS COLOR 900 Setup And Daily Use page 72

Using optional interface cards
Note the following when using optional interface cards:
❏ An optional LocalTalk or Ethernet interface card lets you use
❏ To use the LocalTalk Interface Card (C82312✽), you will need
❏ To use the Type B Ethernet Interface Card (C82362✽/
Follow these steps to install an optional interface card.
1. Make sure the printer is turned off and all the printer's lights
2. Unplug the power cord from the electrical outlet (and from
3. Turn the printer around so that its back faces you, and
70
Downloaded from:
your printer on an AppleTalk network.
two LocalTalk Locking Connector Kits (DIN-8 version).
Attach a connector box to the AppleTalk interface card on the
printer and the other box to the printer port on the Macintosh.
Then attach the LocalTalk cable between the two connector
boxes. See the documentation that comes with the connector
kits for more details.
C82363✽/C82364✽), see the documentation that comes with
the card for setup information.
are off.
the back of the printer, if your printer's power cord is
removable).
c
Caution:
Do not install the interface card when the printer is
connected to an electrical outlet. Doing so may damage the
printer or your computer.
disconnect any existing interface cables.
http://www.usersmanualguide.com/