Connecting The Printer To Your Macintosh - Epson STYLUS COLOR 900 Setup And Daily Use

Connecting the Printer to Your Macintosh

To use the printer's built-in serial interface, you need an Apple
System Peripheral-8 cable.
Note:
❏ To connect to an iMac computer using the USB cable, follow the
❏ If you want to use the optional LocalTalk Interface Card (C82312✽)
Follow these steps to connect the printer.
1. Make sure both your printer and Macintosh are switched off.
2. Connect one end of the interface cable to the serial port on the
3. Connect the other end of the interface cable to either the
24
Downloaded from:
instructions in the USB User's Guide that came with your printer.
or Type B Ethernet Interface Card (C82362✽/C82363✽/C82364✽),
see "Using optional interface cards" on page 70.
back of the printer.
modem port or printer port on the Macintosh. The ports are
marked with the following icons.
modem port
http://www.usersmanualguide.com/
printer port