Table of Contents
Advertisement
Vax U88-M9-B UG V1.0 [J150] [07.03.12]_User guide 12/03/2012 13:59 Page 5
Operation
Operating the appliance
Twist cord storage hook to release
cord.
TOOLS
When vacuuming floors, ensure the
floor/tool selector dial is on the floor
position.
IMPORTANT: Vax recommends that you raise the height of the brushbar to the highest position when using
!
this cleaner on lino and hard flooring due to constant rotation. Vax cannot be held responsible for damage
to these surfaces if the customer fails to take notice of this recommendation.
IMPORTANT: When the vacuum cleaner is stood in the upright position, or when using the hose and tools,
!
the brushbar height adjust must be set to the highest position.
vax.co.uk
All manuals and user guides at all-guides.com
FLOOR
Press unit recline pedal with foot
while pulling back the handle to
recline into operating position.
In upright position turn brushbar
height adjust to desired setting.
Short carpet pile
High carpet pile
Hard floor
Turn on vacuum by pressing the
button on the handle.
5
Advertisement
Table of Contents
