9. Run Bootloader Version again. Press the Enter key continuously, and the Version 22 screen will
appear.
10. Run the Erase Flash commander again, and run the Load Bin->Flash commander, and
then choose the location of Load Bin File as follows.
11. When the following screen appears, the program is being burend-in (about 2.5 min), and the
program is updated.
When you receive the returned monitor, please check whether the firmware version is the latest.
If not, please do the following procedures to upgrade it to the latest version.
ViewSonic Corporation
30
Confidential - Do Not Copy
N1900w-1E