Table of Contents
Advertisement
B).When the Adjust color temperature finish, the OSD will move to "OFFSET" automatic.
Then check color temperature value:
X=0.313±0.03
Y=0.329±0.03
Y=230(min)
Preset (6500K)
Press " MENU" key to exit .
Press " POWER" key quit factory mode
4. Firmware Upgrade Procedure
When you receive the returned LCD TV, please check whether the firmware version is the
latest. If not, please do the following procedures to upgrade it to the latest version.
1. Prepare N1900W(E) ISP Board in hand first.
2. Plug in the ISP Board into your PC Printer Port, then switch the PC on to stand by.
Install Printer Port Driver, and then install Setup_LptDrv_v020201_XP_2000. After installation is
completed, make sure you restart the PC.
ViewSonic Corporation
26
Confidential - Do Not Copy
N1900w-1E
Advertisement
Table of Contents
