Canon imagePRESS Server G100 Installation Procedure page 6

Installation Procedure > Installing the Open I/F PCB
4) Remove the Face Plate (the removed Face Plate will not be used).
• 2 Screws (The removed screws will be used in step 8.)
NOTE:
Ask the user to store the Face Cover, in case it is needed in the future.
2x
5) Remove the screw and replace it with the Card Spacer (the removed screw will be used in
step 8).
1x
Installation Procedure > Installing the Open I/F PCB
6) Remove the Bypass PCB (the removed Bypass PCB will not be used).
• 2 Screws (The removed screws will be used in step 8.)
• 1 Connector
NOTE:
Ask the user to store the Bypass PCB, in case it is needed in the future.
F-1-9
7) Install the Open I/F PCB Mounting Plate.
• 1 Screw (TP; M3 x 6)
TP
M3x6
F-1-10
2x
1x
6
F-1-11
1x
F-1-12
6