Step 3: Connecting To Your Tv - Sony DVP-NS38 Operating Instructions Manual

Step 3: Connecting to your TV

Connect this player to your TV monitor, or projector using an audio/video (SCART) cord. This
connection will use your TV speakers for sound.
l : Signal flow
When connecting to a SCART input jack
Connect a SCART cord (not supplied). Be sure to make the connections firmly to avoid hum and
noise.
• Surround effect (page 39)
TV: Dynamic Theatre, Dynamic, Wide, Night
When using this connection, check that the TV conforms to S video or RGB signals. Refer to the
operating instructions supplied with the TV to be connected. Also, when you set "LINE" to
"S VIDEO" or "RGB" under "SCREEN SETUP" in the Setup Display (page 61), use a SCART
cord that conforms to each signal.
L
C E N T E R
COAXIAL
DIGITAL OUT
INPUT
SCART cord
(not supplied)
to LINE (RGB)-TV
CD/DVD player
TV
15
,continued