Step 4: Connecting To An Av Amplifier (Receiver) - Sony DVP-NS38 Operating Instructions Manual

Step 4: Connecting to an AV amplifier (receiver)

If your AV amplifier (receiver) has a Dolby*
digital input jack, use this connection.
COAXIAL
DIGITAL OUT
[Speakers]
Rear (L)
Front (L)
Centre
: Signal flow
z Hint
For correct speaker location, see the operating instructions supplied with the connected components.
• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch), MPEG audio (5.1ch)
*1 Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories.
*2 "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
Notes
• After you have completed the connection, make the appropriate settings in Quick Setup (page 18). If your
AV amplifier (receiver) has an MPEG audio decoder function, set "MPEG" to "MPEG" in Audio Setup
(page 64). Otherwise, no sound or a loud noise will come from your speakers.
• The TVS effects of this player cannot be used with this connection.
• In order to listen to DTS sound tracks, you must use this connection. DTS sound tracks are not output
through the LINE (RGB)-TV (SCART) jack, even if you set "DTS" to "ON" in Quick Setup (page 18).
1
Digital, DTS*
L C E N T E R
COAXIAL
DIGITAL OUT
to DIGITAL OUT (COAXIAL)
AV amplifier (receiver)
with a decoder
2
, or MPEG audio decoder and a
CD/DVD player
Coaxial digital cord
(not supplied)
to coaxial
digital input
[Speakers]
Rear (R)
Front (R)
Subwoofer
17