Specifications - Sony BDP-S185 Operating Instructions Manual

The System Power-Off function does not
work (BRAVIA Sync).
, Check that [Control for HDMI] and
[HDMI:Linked to TV-off] are set to [On]
(page 18).
Others
Playback does not start from the
beginning of content.
, Press OPTIONS, and select [Play from
start].
Playback does not start from the resume
point where you last stopped playing.
, The resume point may be cleared from
memory depending on the disc when
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the player.
The disc tray does not open and you
cannot remove the disc even after you
press Z.
, Try the following:
and disconnect the mains lead.
Reconnect the mains lead while pressing
2
down Z on the player.
down Z on the player until the tray opens.
Remove the disc.
4
the player for more than 10 seconds until
the player turns off.
The player does not respond to any button.
, Moisture has condensed inside the player
(page 3).
, Hold down [/1 on the player for more than
10 seconds until the player turns off.
If the player still does not respond to any
button, disconnect then reconnect the mains
lead.
22
Turn the player off,
1
Keep pressing
3
Hold down [/1 on
5

Specifications

System
Laser: Semiconductor laser
Inputs and outputs
(Jack name:
Jack type/Output level/Load impedance)
LINE OUT R-AUDIO-L:
Phono jack/2 Vrms/10 kilohms
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
HDMI OUT:
HDMI 19-pin standard connector
LINE OUT VIDEO:
Phono jack/1.0 Vp-p/75 ohms
LAN (100):
100BASE-TX Terminal
USB:
USB jack Type A, maximum current
500 mA (For connecting USB device)
General
Power requirements:
220–240V AC, 50/60Hz
Power consumption:
10 W
Dimensions (approx.):
290 mm × 196 mm × 43 mm
(width/depth/height) incl. projecting parts
Mass (approx.):
1.1 kg
Operating temperature:
5 ºC to 35 ºC
Operating humidity:
25 % to 80 %
Supplied accessories
• Audio/video cable (phono plug ×3) (1)
(Australian/New Zealand model only)
• Remote commander (remote) (1)
• R6 (size AA) batteries (2)
Specifications and design are subject to
change without notice.