JVC LT-37DR1BJ Service Manual page 18

4.4.5 SERVICE MODE ITEMS
4.4.5.1 ADJUSTMENT MODE
This mode is used to adjust the VIDEO CIRCUIT.
HOW TO ENTER THE ADJUSTMENT MODE
When the SERVICE MENU SCREEN of SERVICE MODE is
displayed, press [1] key to enter the ADJUSTMENT MODE.
DESCRIPTION OF STATUS DISPLAY
ADJUSTMENT MODE
(2) SETTING ITEM NAME
S001 S001 R DRIVE R DRIVE
(3) SETTING ITEM No.
(1) COLOUR TEMP.
H : COOL
M : NORMAL
L : WARM
(2) SETTING ITEM NAME
Setting item name are displayed.
(3) SETTING ITEM NO.
Setting item numbers are displayed. The setting item
numbers to be displayed are listed below.
Item No. Item
S001 R DRIVE
S002 G DRIVE
S003 B DRIVE
(4) SETTING VALUE (DATA)
The SETTING VALUE is displayed.
CHANGE AND MEMORY OF SETTING VALUE
SELECTION OF SETTING ITEM
• [FUNCTION / ] key.
For scrolling up / down the setting items.
CHANGE OF SETTING VALUE (DATA)
• [FUNCTION / ] key.
For scrolling up / down the setting values.
MEMORY OF SETTING VALUE (DATA)
Changed setting value is memorized by pressing [MUTING]
key.
1-18 (No.YA688<Rev.001>)
(4) SETTING VALUE (DATA)
M 000 M 000
(1) COLOUR TEMP.
Variable range Setting value
000 - 255 000
000 - 255 000
000 - 255 000
4.4.5.2 MONITOR MODE
This mode displays the signal status of channel that has been
selected now.
4.4.5.3 SYSTEM CONFIGRATION
This mode selects the function that can be used by the user
menu.
4.4.5.4 SOFTWARE UPDATE
This mode updates the version of software.
4.4.5.5 I2C STOP MODE [NO DISPLAY]
This mode is unused.
4.4.5.6 EDID WRITE PROTECT
This mode sets memory with EDID data to write protection.
4.4.5.7 HDMI_EQ SETTING
This mode switches HDMI1.3 compliant and AWG28.
4.4.5.8 SOFTWARE VERSION CHECK
This mode displays the version of microcomputer software and
memory.
4.4.5.9 SOUND CALIBRATION SETTING
This mode sets SOUND CALIBRATION.