Canon PowerShot S95 User Manual page 165

If you press the shutter button halfway and return to the shooting screen
from the custom display settings screen, the settings will not be saved.
• Gray items can also be set, however, they may not appear depending on
the Shooting mode.
• Grid lines will not be recorded on the image.
Changing the IS-Mode Settings
• If camera shake is too strong, attach the camera to a tripod. You should
also set the IS Mode to [Off] when the camera is attached to a tripod.
• When using [Panning], hold the camera horizontally to shoot. Image
stabilization does not work when the camera is held vertically.
Changing Shooting Function Settings
Choose [IS Mode], then press the qr
●
buttons to choose an option.
Image stabilization is always on.
You can confirm the effects
directly on the display, which
makes it easier to check the
Continuous composition or focus. It not only
reduces angular blur, but also
reduces lateral shift blur (hybrid
IS) common to macro
photography.
Image stabilization is only active
Shoot Only
at the moment of shooting.
Image stabilization only counters
up and down motion. This option
Panning
is recommended for shooting
objects moving horizontally.
165