Changing Image Transitions - Canon PowerShot S95 User Manual

Changing Image Transitions

• Only still images shot with this camera will play back in Smart Shuffle.
[
• Smart Shuffle] is not available in the following situations:
- If there are less than 50 images taken with this camera on the memory card.
- If you play back images not supported by Smart Shuffle.
- During filtered playback.
Changing Image Transitions
You can choose from three transition effects when switching between images
in single image playback.
128
Choose an image.
● Press the opqr buttons to choose the
image you want to view next.
The chosen image will be displayed in the
middle, and the next four possibilities will
appear.
● Pressing the m button will display the
middle image at full size. Press the m
button again to restore the original display.
You can also use the zoom lever.
Pressing the n button restores single
●
image playback.
Choose [Transition].
Press the n button to choose
●
[Transition] in the 1 tab, then press the
qr buttons to choose a transition effect.