Macro Mode - Canon Powershot S60 User Manual

a
Sequence
aCompose and shoot the second
image so that it overlaps the first.
Minor discrepancies in the overlap can be
corrected with the software.
An image can be retaken. Press the
arrow on the omni selector to return to that frame.
A maximum of 26 images can be recorded
either horizontally or vertically.
bUse the same procedures to shoot
the remaining frames.
cPress the SET button after the last shot.
52 5. Useful Shooting Functions
Sequence
c
, , or

Macro Mode

Shooting Mode Dial
Use the macro mode to shoot close-ups of
subjects in the range of 4 to 44 cm (1.6 in. to
1.4 ft.) at wide angle end and 30 to 44 cm (1.0
ft. to 1.4 ft.) at telephoto end.
Always use the LCD monitor to compose
images in macro mode. Shooting with the
viewfinder is possible, though, the parallax
phenomenon may cause images composed
with the optical viewfinder to be off-center
(p. 32).
When the lens is zoomed out to the wide angle
end, the recordable area is 64 x 47 mm (2.5 in.
x 1.9 in.) at the closest focal distance, and at
telephoto end, it is 106 x 80 mm (4.2 in. x 3.1
in.).
The exposure may not be optimal when the
flash is used in macro mode.