Appendix; List Of Messages - Canon Powershot S60 User Manual

Appendix

The following messages may appear on the LCD monitor.
For messages which may appear when a printer is connected, refer to the Direct Print User Guide.
Busy...
No memory card
Cannot record!
Memory card error!
Memory card full
Naming error!
Change the battery pack.
No image
Image too large
Incompatible JPEG format
Corrupted data
RAW
Cannot magnify!
136 Appendix

List of Messages

Image is being recorded to, or read from, CF card.
Resetting all the camera and menu settings to default
You turned on the power without a CF card installed.
You attempted to shoot an image without a CF card installed.
CF card has experienced an anomaly.
CF card is too full to accommodate more images or print settings.
The file could not be created because there is a file with the same name as the directory that the camera is
attempting to create, or the highest possible file number has already been reached. In the Set up menu,
please set [File No. Reset] to [On]. After you save all the images you wish to retain onto a computer,
format the CF card (p. 19). Please note that formatting will erase all the existing images and other data.
Battery charge is insufficient to operate the camera. Replace it immediately with a charged battery pack or
recharge it.
No images recorded on CF card.
You attempted to play back an image larger than 4064 x 3048 pixels.
You attempted to play back an incompatible JPEG file.
You attempted to play back an image with corrupted data.
You attempted to play back a RAW image in an incompatible format.
You attempted to magnify a movie or an image that was photographed with another camera, recorded in a
different format, or edited on a computer.