Glossary - Sony RHT-G1550 Operating Instructions Manual

Theatre stand system
Table of Contents

Advertisement

General
Power requirements
Power consumption
On: 125 W
Active Standby (power saving function is on
and the TV connected to the stand is in standby
mode): 0.5 W or less
Standby (Control for HDMI is off): 0.3 W or
less
Dimensions (approx.)
Mass (approx.)
Supplied accessories
Optical cable (1)
Remote commander (RM-ANU032) (1)
Size AA (R6) batteries (2)
Cable ties (2)
FM wire antenna (aerial) (1)
AM loop antenna (aerial) (1)
Operating Instructions (1)
Design and specifications are subject to change without
notice.
• Standby power consumption 0.3 W.
• Halogenated flame retardants are not used in the
certain printed wiring boards.
• Over 85 % power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.
220 – 240 V, 50/60 Hz
1,550 × 400 × 400 mm
(w/h/d)
53 kg

Glossary

Deep Color
Video signals for which the color depth of
signals passing through an HDMI jack have been
raised. The number of colors that could be
expressed by 1 pixel was 24 bits (16,777,216
colors) with the current HDMI jack. However,
the number of colors which can be expressed by
1 pixel will be 36, etc., bits when the receiver
corresponds to Deep Color. Since the gradation
of the depth of a color can be expressed more
finely with more bits, continuous color changes
can be more smoothly expressed.
Dolby Digital
This movie theater sound format is more
advanced than Dolby Surround Pro Logic. In this
format, the surround speakers output stereo
sound with an expanded frequency range, and a
subwoofer channel for deep bass is
independently provided. This format is also
called "5.1" with the subwoofer channel
designed as the 0.1 channel (since it functions
only when a deep bass effect is needed). All six
channels in this format are recorded separately
for superior channel separation. Furthermore,
since all the signals are processed digitally, less
signal degradation occurs.
Dolby Pro Logic II
Dolby Pro Logic II creates five full-bandwidth
output channels from 2 channel sources. This is
done using an advanced, high-purity matrix
surround decoder that extracts the spatial
properties of the original recording without
adding any new sounds or tonal colorations.
DTS
Digital audio compression technology
developed by Digital Theater Systems, Inc. This
technology conforms to 5.1-channel surround.
This format comprises of stereo rear channel and
there is discrete subwoofer channel in this
format. DTS provides the same 5.1 discrete
channels of high quality digital audio. The good
channel separation is realized due to the all
channel data being recorded discretely and
processed in digitally.
continued
45
GB

Advertisement

Table of Contents
loading

Table of Contents