Canon PowerShot S410 Digital ELPH User Manual page 141

Problem
White dots appear
on the image
Flash does not fire
Image not showing
on TV monitor
Zoom does not work Zoom lever pressed
Reading images
from CF card is slow
Recording images to
CF card takes a long
time
Cause
Light from the flash
has reflected off
dust particles or
insects in the air.
(This is especially
noticeable when
shooting at wide
angle)
Flash is set to off
Incorrect video
system setting
Shooting in stitch
assist
during movie
recording
CF card was
formatted in another
device
Solution
• This is a phenomenon that occurs
with digital cameras and does not
constitute a malfunction.
• Set the flash to on.
• Set the video system to the
appropriate setting, NTSC or PAL,
for your TV (p. 50).
• The output will not appear on a
TV in stitch assist. Cancel the
stitch assist.
• Adjust the zoom before shooting
a movie.
• Use a CF card formatted in your
camera.
See Formatting CF Cards (p.
107).
139