Table of Contents
Advertisement
Connecting
Before connecting
f Before connecting, carefully read the operating instructions for the external device to be connected.
f Turn off the power of all devices before connecting cables.
f Take note of the following points before connecting the cables. Failure to do so may result in malfunctions.
g When connecting a cable to a device connected to the projector or the projector itself, touch any nearby
metallic objects to eliminate static electricity from your body before performing work.
g Do not use unnecessarily long cables to connect a device to the projector or to the projector body. The longer
the cable, the more susceptible to noise it becomes. Since using a cable while it is wound makes it act like an
antenna, it is more susceptible to noise.
g When connecting cables, connect GND first, then insert the connecting terminal of the connecting device in a
straight manner.
f Acquire any connection cable necessary to connect the external device to the system that is neither supplied
with the device nor available as an option.
f If video signals from video equipment contain too much jitter, the images on the screen may wobble. In this
case, a time base corrector (TBC) must be connected.
f The projector accepts video signals, Y/C signals, YC
signals are TTL level), and digital signals.
f Some computer models or graphics cards are not compatible with the projector.
f Use a cable compensator when you connect devices to the projector using long cables. Otherwise the image
may not display properly.
f Refer to "List of compatible signals" ( x page 149) for the types of video signals that can be used with the
projector.
<COMPUTER 1 IN> terminal pin assignments and signal names
Outside view
(11)
(15)
(6)
(10)
(1)
(5)
<COMPUTER 2 IN/1 OUT> terminal pin assignments and signal names
Outside view
(11)
(15)
(6)
(10)
(1)
(5)
36 - ENGLISH
Chapter 2 Getting Started — Connecting
C
/YP
B
R
Pin No.
Signal name
(1)
R/P
(2)
G/Y/Y
(3)
B/P
(4)
(5)
GND
(6)
GND
(7)
GND
(8)
GND
Pin No.
Signal name
(1)
R/P
(2)
G/Y
(3)
B/P
(4)
(5)
GND
(6)
GND
(7)
GND
(8)
GND
P
signals, analog RGB signals (synchronization
B
R
Pin No.
/C
(9)
R
(10)
(11)
B
―
(12)
(13)
(14)
(15)
Pin No.
(9)
R
(10)
(11)
B
―
(12)
(13)
(14)
(15)
Signal name
+5 V
GND
GND
DDC data
HD/SYNC
VD
DDC clock
Signal name
+5 V
GND
GND
DDC data
HD/SYNC
VD
DDC clock
Advertisement
Table of Contents
