Chapter 7 Appendix — Precautions for Attaching Ceiling Mount Bracket
Precautions for Attaching Ceiling Mount Bracket
f When installing the projector to a ceiling, be sure to use the specified optional Ceiling Mount Bracket as the following
combinations:
ET-PKD120H (for High Ceilings) and ET-PKE301B (Projector Mount Bracket)
ET-PKD120S (for Low Ceilings) and ET-PKE301B (Projector Mount Bracket)
Other combination is not available.
f When installing the projector, attach the drop-prevention wire supplied with the Projector Mount Bracket.
f Ask a qualified technician to do the installation work such as mounting the projector on the ceiling.
f Panasonic takes no responsibility for any accident, damage, damages to the projector resulting from use of a ceiling mount
bracket not manufactured by Panasonic, optional Ceiling Mount Bracket combinations not specified , installation method not
described in installation manual, optional accessories not specified or the inappropriate choice of location for installation,
even if the warranty period of the projector has not expired.
f Unused products must be removed promptly by a qualified technician.
f Use a torque screwdriver or Allen torque wrench to tighten bolts to their specified tightening torques. Do not use electric
screwdrivers or impact screwdrivers.
f Read the Installation Instructions for the Ceiling Mount Bracket for details.
f The model numbers of accessories and optional accessories are subject to change without prior notice.
Bottom view
M4
M6
M4
M4
M6
M6
Note
f You can also use the existing ceiling mount bracket ET-PKF110H (for High Ceilings) or ET-PKF110S (for Low Ceilings).
Model No. of Ceiling Mount Bracket (Supplement): ET-PKF110H (for High Ceilings)
Bottom view
M4
M6
M4
M4
M6
M6
154 - ENGLISH
M6
M4
M4
M6
ET-PKF110S (for Low Ceilings)
M6
M4
M4
M6
Model No. of Ceiling Mount Bracket:
ET-PKD120H (for High Ceilings)
ET-PKE301B (Projector Mount Bracket)
ET-PKD120S (for Low Ceilings)
ET-PKE301B (Projector Mount Bracket)
Torque: (M6) 4 ± 0.5 N·m
Model No. of Ceiling Mount Bracket:
ET-PKF110H (for High Ceilings)
ET-PKF110S (for Low Ceilings)
Torque: (M4) 1.25 ± 0.2 N·m
M6
12 mm
(15/32")
M4
8 mm
( 5/16")