Camcorder, Video Game, Etc; Function For Conversion Of Video Signals - Sony STR-DA5400ES Operating Instructions Manual

Remove the cover.
C Audio/video cord (not supplied)

Function for conversion of video signals

This receiver is equipped with a function for converting video signals.
• Composite video signals can be output as HDMI video and component video signals.
• Component video signals can be output as HDMI video and video signals.
As the initial setting, video signals input from the connected component are output to the HDMI
OUT or MONITOR OUT jacks as shown in the table below.
We recommend you set the video conversion function to match the resolution of the monitor you
are using.
For details on the video converting function, see "
OUTPUT jack
INPUT jack
HDMI IN 1/2/3/4/5/6
VIDEO IN
COMPONENT VIDEO IN
a : Video signals are output.
– : Video signals are not output.
To the VIDEO 2 IN/
PORTABLE AV IN jacks
C
Note
Before connecting cords, make sure to disconnect
the AC power cord (mains lead).
COMPONENT VIDEO
HDMI OUT A B
a
a
a
Camcorder,
video game
Video settings" (page 122).
MONITOR VIDEO OUT
MONITOR OUT
–
a
a
–
a
a
continued
41 GB