Component Video Input - Sony STR-DA5400ES Operating Instructions Manual

E COMPONENT VIDEO INPUT/
OUTPUT section
Y, P /C
B B
C IN/OUT*
R
jacks
F RS-232C port
G AUDIO INPUT/OUTPUT section
AUDIO IN/
OUT jacks
MULTI
CHANNEL
INPUT jacks
PRE OUT jacks Connect to an
16
GB
, P / Connect to a DVD
R
player, TV, or a
satellite tuner (page
27, 38, 39).
Used for
maintenance and
service.
Connect to a tape
deck or MD deck, etc
(page 30, 33).
Connect to a Super
Audio CD player or
DVD player with an
analog audio jack for
7.1 channel or 5.1
channel sound
(page 32).
external power
amplifier.
H VIDEO/AUDIO INPUT/OUTPUT
section
AUDIO IN/
OUT jacks
VIDEO IN/
OUT* jacks
AUDIO OUT
jacks
VIDEO OUT
jack
ZONE 2
VIDEO OUT
jack
(U.S.A./Canadian model
only)
EXT VIDEO IN
jack
I SPEAKERS section
* You can watch the selected input image when you
connect the HDMI OUT or MONITOR OUT jacks
to a TV (page 27). You can operate this receiver
using a GUI (Graphical User Interface) (page 45).
Connect to a VCR or
a DVD player etc.
(page 27, 38, 39, 40).
Connect to the
component in zone 2
or zone 3 (page 89).
An RJ-45 jack used
to send a video signal
to the component in
zone 2. Use a CAT5
cable for the
connection. Used for
custom installation.
For information on
how to use this jack,
consult your dealer.
Attention
Do not use this jack
for an Ethernet LAN
connection. Doing so
may cause a
malfunction.
Connects to the
component when
you want to watch in
PIP (Picture in
Picture) window.
Connects to speakers
(page 25).