Table of Contents
Advertisement
Linksys E2500
RADIUS
This option features WEP used in coordination with a
RADIUS server . (This should only be used when a RADIUS
server is connected to the Router .)
IMPORTANT:
If you select RADIUS as your
Security Mode, each device in your wireless
network MUST use RADIUS and the same WEP
encryption and shared key .
RADIUS
RADIUS Server
Enter the IP address of the RADIUS server .
RADIUS Port
Enter the port number of the RADIUS
server . The default is 1812 .
Shared Key
Enter the key shared between the Router
and the server .
Encryption
Select a level of WEP encryption, 64 bits
10 hex digits or 128 bits 26 hex digits . The default is
64 bits 10 hex digits .
Passphrase
Enter a Passphrase to automatically generate
WEP keys . Then click Generate .
Key 1-4
If you did not enter a Passphrase, enter the WEP
key(s) manually .
TX Key
Select a default TX (Transmit) Key (choose which
Key to use) . The default is 1 .
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes .
Advanced Dual-Band N Router
Chapter 1: Advanced Configuration
Wireless > Wireless MAC Filter
Wireless access can be filtered (restricted) by specifying
the MAC addresses of the devices in your wireless network .
Wireless > Wireless MAC Filter
Wireless MAC Filter
Enabled/Disabled
To filter wireless users by the MAC
addresses of their computers or devices, select Enabled .
Otherwise, keep the default, Disabled .
Access Restriction
Prevent
When the Wireless MAC Filter is enabled and this
option is selected, PCs listed in the MAC Address filter list
will be prevented from accessing the wireless network .
Permit
When the Wireless MAC Filter is enabled and this
option is selected, only PCs listed in the MAC Address filter
list will be granted access to the wireless network .
MAC Address Filter List
Wireless Client List
Click this to open the Wireless Client
List screen .
Wireless Client List
12
Advertisement
Table of Contents
