Sony STR-DA3400ES Operating Instructions Manual page 90

Name Function
I SP A/SP B/
Lights up according to the
SP A+B speaker system used (page 42).
However, these indicators do
not light up if the speaker
output is turned off or if
headphones are connected.
J SLEEP
Lights up when the sleep timer
is activated.
K A.DIRECT
Lights up when the receiver is
processing Analog Direct
signals.
L Tuner
Lights up when using the
indicators
receiver to tune in radio
stations, etc.
M MEM
Lights up when a memory
function, such as Preset
Memory, etc., is activated.
N ; PL/
"; PL" lights up when the
; PL II/
receiver applies Dolby Pro
; PL IIx
Logic processing to 2 channel
signals in order to output the
center and surround channel
signals.
"; PL II" lights up when the
Dolby Pro Logic II decoder is
activated.
"; PL IIx" lights up when the
Dolby Pro Logic IIx decoder is
activated.
However, these indicators do
not light up if there are no
center and surround speakers
and you select a sound field
using the A.F.D. button.
O BI-AMP
Lights up when "Sur Back
Assign" is set to "BI-AMP".
P EQ
Lights up when the equalizer is
activated.
Q NEO:6
Lights up when DTS Neo:6
Cinema/Music decoder is
activated.
R DTS-HD
"DTS-HD MSTR" lights up
MSTR/ when the receiver is decoding
DTS-HD HI DTS-HD Master Audio
RES
signals.
"DTS-HD HI RES" lights up
when the receiver is decoding
DTS-HD High Resolution
signals.
S LPCM
Lights up when Linear PCM
signals are detected.
GB
90
Name Function
T ANALOG
Lights up when
– INPUT MODE is set to
– INPUT MODE is set to
– the "2ch Analog Direct" is
U DMPORT
Lights up when DIGITAL
MEDIA PORT adapter is
connected and "DMPORT" is
selected.
V MULTI IN
Lights up when multi channel
input is selected.
W HDMI
Lights up when the receiver
recognizes a component
connected via an HDMI IN
jack.
X Playback
The letters (L, C, R, etc.)
channel indicate the channels being
indicators played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
L Front Left
R Front Right
C
Center (monaural)
SL Surround Left
SR Surround Right
S
Surround (monaural or the
surround components obtained
by Pro Logic processing)
SB L
Surround Back Left
SB R Surround Back Right
SB Surround Back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
When Speaker Pattern is set to
"3/0.1" (page 96)
Sound Field: A.F.D. AUTO
"AUTO" and no digital signal
is being input through the
COAXIAL, OPTICAL or
HDMI jacks.
"ANALOG".
being used.
SW
L C R
SL SR