Surround Speaker Position - Sony STR-DA3200ES Operating Instructions Manual

Multi cjhannel av receiver
Hide thumbs Also See for STR-DA3200ES:
Table of Contents

Advertisement

C cannot be more than 4.5 meters closer than the
distance between the listening position and the
front speakers A. Place the speakers so that the
difference in the length of C in the following
diagram is no more than 4.5 meters closer than the
length of A.
Example: Adjust the distance C to 1.5 meters or
more when the distance A is 6 meters.
This is important because incorrect speaker
placement is not conductive to the enjoyment of
surround sound. Place note that placing the
speakers closer than the required will cause a delay
in the output of the sound from that speaker. In
other words, the speaker will sound like it is farther
away.
x DISTANCE UNIT (Distance unit)
Lets you select the unit of measure for setting
distances.
• feet
The distance is displayed in feet.
• meter
The distance is displayed in meters.
x SP POSI.

(Surround speaker position)

Lets you specify the location of your surround
speakers for proper implementation of the
surround effects in the Cinema Studio EX
modes (page 77). This setup item is not
available when the surround speakers are set to
"NO" (page 69).
• SIDE/LOW
Select if the location of your surround
speakers corresponds to sections A and C.
• SIDE/HIGH
Select if the location of your surround
speakers corresponds to sections A and D.
• BEHD/LOW
Select if the location of your surround
speakers corresponds to sections B and C.
• BEHD/HIGH
Select if the location of your surround
speakers corresponds to sections B and D.
continued
71
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents