Using The Flash - Canon PowerShot S30 User Manual

Using the Flash

Use the flash according to the guidelines below.
Red-eye reduction, Auto
Auto
Red-eye reduction, Flash on
Flash on
Flash off
1
Press the
flash modes.
• The selected flash mode appears on the LCD
monitor.
2
Shoot the image.
• The flash will fire if the indicator beside the viewfinder shines orange when
the shutter button is pressed halfway.
• Shooting procedures are the same as for the
Built-in Flash Settings
The flash cannot be used with some shooting modes.
Red-eye
reduction, Auto
Auto
Red-eye reduction,
Flash on
Flash on
Flash off
* Default setting.
Setting selection is possible.
Setting can only be selected for the first image.
- Setting selection is not possible.
The flash fires automatically as required by the lighting level, and the
red-eye reduction lamp fires each time the main flash fires
The flash fires automatically as required by the lighting level.
The red-eye reduction lamp and the flash always fire.
The flash always fires.
The flash does not fire.
button to switch between
* * *
–
–
*
Shooting - Letting the Camera Select Settings
Auto mode (p. 44).
–
*
* –
–
* *
– – –
– – –
–
–
* * * *
–
–
*
47