Panasonic KX-TGD562 Operating Instructions Manual page 23

the desired cellular line and press
MSELECTN.
To release hold on the landline:
Press M N.
R Another handset user can take the call
by pressing M
Note:
R After holding for 10 minutes, the call is
disconnected.
Mute
1
Press MMUTEN during a call.
2
To return to the call, press MMUTEN.
Note:
R MMUTEN is a soft key visible on the display
during a call.
Flash for landline calls
MFLASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 38.
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your phone
service provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller's information is displayed on the unit
that is in use after you hear the call waiting
tone.
1
Press MFLASHN to answer the 2nd call.
2
To switch between calls, press MFLASHN.
For assistance, please visit http://shop.panasonic.com/support
N.
Making/Answering Calls
Note:
R Please contact your phone service provider
for details and availability of this service in
your area.
Temporary tone dialing for
landline calls (for rotary/pulse
service users)
Press * before entering access numbers
which require tone dialing.
Handset clarity booster
This feature can improve sound clarity when
the handset is used in an area where there
may be interference. During an outside call,
this feature is turned on automatically when
necessary.
R When this feature is turned on,
displayed. However, during a cellular call,
is not displayed even though the
feature is activated.
Call share
You can join an existing outside call.
n While another unit is on a cellular call:
1
To join the conversation, press
MCELLN.
R You can join the conversation in the
following situations.
– Only 1 cellular phone is paired.
– A specific line is set to make
cellular calls (page 20).
2
MbN: Select the corresponding cellular
phone. a MSELECTN
n While another unit is on a landline call:
To join the conversation, press M
Note:
R A maximum of 3 parties (including 1 outside
party) can join a conversation using 2
extensions. (3-way conference)
R To prevent other users from joining your
conversations with outside callers, turn call
sharing mode off (page 38).
is
N.
23