Canon PowerShot S100 DIGITAL ELPH User Manual page 73

Subject is too bright
Cause
Subject is too close
Subject is much
brighter than its
surroundings
Light is shining directly
on subject or reflected
off subject onto
camera
Flash is set to On
Flash will not fire
Cause
Flash is set to Off
• When using the flash, stay 27 cm to
3 m (11 in. to 10 ft.) from the
subject at the maximum wide angle
or 27 cm to 2 m (11 in. to 7 ft.)
from the subject at the maximum
telephoto setting.
• Adjust the exposure compensation
to a negative (-) setting.
• Change the shooting angle.
• Set the flash to Auto or Off.
• Set the flash to Auto or On.
Appendices
Solution
Solution
71