Fujitsu i-4990C Operator's Manual page 88

Pick start time
This function sets the period from when paper is manually put on the hopper to when the pick opera-
tion starts.
LCD display
Pick start time
The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen (Paper
Length Check) appears.
2. Press repeatedly until "Pick start time"
appears in the lower line of the menu screen.
3. Press
ENTER
The option select screen appears with the
current setting 01.0S blinking (blinking indi-
cates "changeable").
4. Press or
The displayed option changes (00.2S to
29.8S). The value changes in 0.2 seconds.
5. When the desired value appears, press
to save the change.
ENTER
The LCD returns to the <<SETUP MODE>>
menu screen (Pick start time).
6. Press
CANCEL
The LCD returns to the Ready screen.
6-36
Options
00.2 S to 29.8 S (Default: 01.0 S)
.
.
two times.
Remarks
In units of 0.2 second
<<SETUP MODE>>
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Pick start time
Pick start time
01.0 S
Pick start time
05.0 S
<<SETUP MODE>>
Pick start time
Ready