Canon POWERSHOT IXUS 115 HS User Manual page 175

Grid lines will not be recorded on the image.
Changing the IS-Mode Settings
• If camera shake is too strong, attach the camera to a tripod. You should
also set the IS Mode to [Off] when the camera is attached to a tripod.
• When using [Panning], hold the camera horizontally to shoot. Image
stabilization does not work when the camera is held vertically.
Changing Shooting Function Settings
Choose [IS Mode], then press the qr
buttons to choose an option.
Image stabilization is always on.
You can confirm the effects
directly on the display, which
makes it easier to check the
Continuous composition or focus.
When shooting movies, the
camera also reduces strong
camera shake, for example when
walking (Dynamic mode).
Image stabilization is only active
Shoot Only*
at the moment of shooting.
Image stabilization only counters
up and down motion. This option
Panning*
is recommended for shooting
objects moving horizontally.
Off –
* Setting changes to [Continuous] when
shooting movies.
175