Sony DAV-DZ361W Operating Instructions Manual page 34

Checking the audio signal
format
If you press AUDIO repeatedly during
playback, the format of the current audio signal
(PCM, Dolby Digital, DTS, etc.) appears as
shown below.
x DVD
Example:
Dolby Digital 5.1 channel
Surround (L/R)
1: ENGLISH
Front (L/R) +
Center
Currently playing program format
Example:
Dolby Digital 3 channel
Front (L/R)
1:SPANISH
Currently playing program format
x DATA CD (DivX video file)/DATA DVD
(DivX video file)
Example:
MP3 audio
1:MP3
34
GB
LFE (Low
Frequency Effect)
DOLBY DIGITAL 3 / 2 .1
L C R
LFE
LS RS
Surround
(Monaural)
DOLBY DIGITAL 2 / 1
L R
S
128k
Bit rate
Selecting a playback area for a
Super Audio CD
You can play the Super Audio CD (page 103) by
selecting the playback area.
To select a playback area on a 2
channel + Multi-channel Super
Audio CD
Some Super Audio CDs consist of a 2 channel
playback area and a multi-channel playback
area. You can select the playback area you want
to listen to.
1
Press DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
2
Press X/x to select
2CH], then press
The options for [MULTI/2CH] appear.
3
Press X/x to select the desired setting
and press .
• [MULTI]: You can play the multi-channel
playback area.
• [2CH]: You can play the 2 channel
playback area.
Note
• You cannot change the playback area during
playback.
• When the Super Audio CD does not have the multi-
channel playback area, you cannot select the
playback area.
To change a playback layer when
playing a hybrid Super Audio CD
Some Super Audio CDs consist of a Super
Audio CD layer and a CD layer. You can change
the playback layer you want to listen to.
Note
• When the Super Audio CD does not have the CD
layer, you cannot select the playback layer.
1
Press DISPLAY while the system is
in stop mode.
[MULTI/
.