Sony DAV-DZ361W Operating Instructions Manual page 101

General
Power requirements
Power consumption
Output voltage (DIGITAL MEDIA PORT)
Output current (DIGITAL MEDIA PORT)
Dimensions (approx.)
Mass (approx.)
Surround amplifier (TA-SA100WR)
Amplifier Section
Stereo mode (rated)
Surround mode (reference) RMS output power
* Depending on the source, there may be no sound
output.
Rated impedance:
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Wireless transceiver (EZW-RT10)
Communication system
Output
Frequency band
Modulation method
Power requirements
Dimensions (approx.)
Mass (approx.)
220 V - 240 V AC,
50/60 Hz
On: 125 W
Standby: 0.3 W (at the
Power Saving mode)
DC 5 V
700 mA
430 mm × 66 mm × 385
mm (w/h/d) incl.
projecting parts
430 mm × 66 mm × 415
mm (w/h/d) with the
wireless transceiver
inserted
4.2 kg
80 W + 80 W (at 3 ohms, 1
kHz, 1 % THD)
142 W (per channel at 3
ohms, 1 kHz, 10 % THD)*
3 - 16 Ω
220 V - 240 V AC,
50/60 Hz
On: 50 W
85 mm × 100 mm × 330
mm (w/h/d) (incl. EZW-
RT10)
85 mm × 100 mm × 345
mm (w/h/d) incl. speaker
cord cover and speaker
cord holder
1.7 kg incl. speaker cord
cover and speaker cord
holder
S-AIR Specification
version 1.0
12.0 mW
2.4000 GHz - 2.4835 GHz
DSSS
DC 3.3 V, 350 mA
50 mm × 13 mm × 60 mm
(w/h/d)
24 g
Design and specifications are subject to change
without notice.
• Standby power consumption 0.3 W.
• Halogenated flame retardants are not
used in the printed wiring boards.
• Over 85% power efficiency of
amplifier block is achieved with the
full digital amplifier, S-Master.
101
GB