[Music Settings]; [System Settings] - Sony BDV-N590 Operating Instructions Manual

[Music Settings]

x [Super Audio CD Playback Layer]
[Super Audio CD]: Plays the Super Audio CD
layer.
[CD]: Plays the CD layer.
x [Super Audio CD Playback Channels]
[DSD 2ch]: Plays the 2-channel area.
[DSD Multi]: Plays the multi-channel area.

[System Settings]

x [OSD Language]
You can select your language for the system on-
screen displays.
x [Illumination/Display]
You can select the status of the soft-touch
buttons (page 9) and front panel display
(page 10).
[On]: The soft-touch buttons and the front panel
display stay illuminated.
[Auto]: The soft-touch buttons and the front
panel display turn off when the system is not
being operated.
x [HDMI Settings]
[Control for HDMI]
[On]: On. You can operate mutually between
components that are connected with an HDMI
cable.
[Off]: Off.
[Audio Return Channel]
This function is available when you connect the
system to a TV's HDMI IN jack that is
compatible with the Audio Return Channel
function.
[Auto]: The system can receive the digital audio
signal of the TV automatically via an HDMI
cable.
[Off]: Off.
42
GB
• This function is available only when [Control for
HDMI] is set to [On].
[HDMI1 Audio Input Mode] (Europe models
only)
You can select the audio input of the component
that is connected to the HDMI (IN 1) jack.
[HDMI1]: The sound of the component that is
connected to the HDMI (IN 1) jack is input from
the HDMI (IN 1) jack.
[TV]: The sound of the component that is
connected to the HDMI (IN 1) jack is input from
the TV (DIGITAL IN OPTICAL) jack.
x [Quick Start Mode]
[On]: Shortens the startup time from standby
mode. You can operate the system quickly after
turning it on.
[Off]: The default setting.
x [Power Save Drive]
[On]: Reduces power consumption when
volume level is low.
[Off]: Normal status. The system can output
sound volume.
x [Auto Standby]
[On]: Turns on the [Auto Standby] function.
When you do not operate the system for about
30 minutes, the system enters standby mode
automatically.
[Off]: Turns off the function.
x [Auto Display]
[On]: Automatically displays information on the
screen when changing the viewing titles, picture
modes, audio signals, etc.
[Off]: Displays information only when you
press DISPLAY.
x [Screen Saver]
[On]: Turns on the screen saver function.
[Off]: Off.
x [Software Update Notification]
[On]: Sets the system to inform you of newer
software version information (page 38).
[Off]: Off.